AccueilGalerieRechercherS'enregistrerConnexionNouveaux messages depuis dernière visite
Rechercher
 
 

Résultats par :
 
Rechercher Recherche avancée
Qui est en ligne ?
Il y a en tout 23 utilisateurs en ligne :: 2 Enregistrés, 0 Invisible et 21 Invités :: 2 Moteurs de recherche

alain combemale, DidierF

Le record du nombre d'utilisateurs en ligne est de 355 le Lun 13 Sep 2021 - 14:59
Derniers sujets
» [Oldies] Problèmes de traduction
wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeAujourd'hui à 1:08 par DidierF

» [Oldies] Collections motos en vente aux enchères...
wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeAujourd'hui à 0:04 par T54

» [Oldies] Quizz (26)
wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeHier à 23:45 par DidierF

» [Technique] Honda racing des sixties
wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeHier à 23:23 par Adco

» controle technique moto
wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeHier à 21:58 par Srx56

» 23e GP du Ried
wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeHier à 15:08 par obaya

» [Sorties] BMC 23/24 juillet 2022
wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeHier à 13:46 par spyderman 32

» [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5)
wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeHier à 13:19 par Architito2002

» WSBK Estoril 2022
wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeHier à 13:13 par mickey

» [MotoGP] GP de France 2022 au Mans - Les 13 , 14 et 15 Mai 2022
wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeHier à 9:46 par crigar

» [SORTIES] Sunday Ride Classic 2022, 11 et 12 juin
wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeDim 22 Mai 2022 - 13:35 par EDOUARD Jean

»  [MotoGP] Infos , nouveautés , potins et plus pour la saison GP 2023 ...
wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeDim 22 Mai 2022 - 8:56 par EDOUARD Jean

» [Oldies] 250 PERNOD
wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeSam 21 Mai 2022 - 11:34 par Ed

» (Oldies) Un Pépé, des coques (et accessoirement des poutres)
wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeVen 20 Mai 2022 - 21:19 par yves kerlo

» [Oldies] Un petit bout de l’histoire Morbidelli, 1977-1979
wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeVen 20 Mai 2022 - 20:32 par spreyer

» [Oldies] Les Suzuki d'usine 50 et 125cc à Bourg en Bresse en 1966
wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeVen 20 Mai 2022 - 12:50 par pascaltz

» [SORTIES] Vintage Revival Montlhéry mai 2022
wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeVen 20 Mai 2022 - 12:08 par Dan42

» [Oldies] Jarno Saarinen, la star qui a revolutionné le pilotage (Part 5)
wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeVen 20 Mai 2022 - 0:41 par DidierF

» [Oldies] Les transporteurs de motos des paddocks
wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeVen 20 Mai 2022 - 0:13 par closed

» [Oldies] Des livres sur la course moto
wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeJeu 19 Mai 2022 - 23:57 par DidierF

» [ oldies ] Les photos de Roger Lohrer
wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeJeu 19 Mai 2022 - 22:15 par spyderman 32

» Tom Dickie RIP
wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeJeu 19 Mai 2022 - 13:33 par philwood

» [Fiction] Steak...
wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeMer 18 Mai 2022 - 16:03 par janpol84

» Mais pourquoi le pneu AR est plus large?
wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeMar 17 Mai 2022 - 22:26 par justin

» CONTROLE TECH
wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeMar 17 Mai 2022 - 21:54 par Mykeul

» Le petit avantage de la Bestia.
wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeMar 17 Mai 2022 - 16:08 par Aragon

» North West 200
wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeMar 17 Mai 2022 - 9:57 par Aragon

» [Oldies] Honda 6
wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeLun 16 Mai 2022 - 20:01 par T54

» [Pit Laners en course!] Clément Révolte (coupe YAMAHA R125)
wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeLun 16 Mai 2022 - 16:01 par BOOZE

» Alain Michel
wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeLun 16 Mai 2022 - 15:24 par janpol84

La réclame...
Mots-clés
classic side rouge motobecane RACING inventaire bresse wanted 2013 francaises oldies artisanales aprilia coupe terrot ROAD yamaha ducati 1973 geco zone 1976 motos bourg charade suzuki
Meilleurs posteurs
Marc
wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Voting16wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Voting13wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Voting15 
EDOUARD Jean
wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Voting16wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Voting13wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Voting15 
philwood
wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Voting16wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Voting13wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Voting15 
mickey
wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Voting16wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Voting13wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Voting15 
Pierre"PhilRead"
wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Voting16wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Voting13wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Voting15 
yves kerlo
wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Voting16wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Voting13wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Voting15 
Fügner
wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Voting16wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Voting13wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Voting15 
Jarno
wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Voting16wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Voting13wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Voting15 
bubu
wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Voting16wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Voting13wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Voting15 
Dialmax
wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Voting16wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Voting13wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Voting15 
La réclame...
 

 [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5)

Aller en bas 
+42
remix31
Apriliabarth
Tim Ey
pojoran
Institute of TwoStrokes
Eric_91
jfn2
melvyn trevor
JPG
Toop
alain combemale
Charles Kaneb
carlovitch1
JanBros
Frits Overmars
MINGRET01
EDOUARD Jean
Maurice Specken
samy
laranjateam
polcat88
motori49
Quod et probat
Elmi
bentou
LeonardoMRF2
MANETON
RAW
Vannik
desmofr16
Döllinger
fullgazlolo
Emmanuel Laurentz
SLT
Dan42
Adco
Marc
CARBONX2
porttiming124
fpayart
Jan Thiel
peter1962
46 participants
Aller à la page : 1, 2, 3 ... 10, 11, 12  Suivant
AuteurMessage
Frits Overmars

Frits Overmars


Nombre de messages : 2485
Age : 73
Localisation : Raalte, Holland
Date d'inscription : 12/10/2010

wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Empty
MessageSujet: [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5)   wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeMar 14 Avr 2020 - 17:48

peter1962 a écrit:
[there I was thinking that Jorg Möller was the second best two stroke genius of that era   (after Jan of course)   but after 50 years we hear that he found the 2Stroke gospel by looking at yamaha.
When Yamaha first dominated two-stroke racing, Jörg was still a student. And shortly after he joined Van Veen, he had the opportunity to study the Yamaha technique. He would have been crazy not to take that opportunity.
Jan Thiel (Jamathi), Jörg Möller (Van Veen Kreidler) and Francisco Tombas (Derbi) were the protagonists in the 50cc field in the early 1970s, and all three had great respect for each other. And so have I.
Revenir en haut Aller en bas
carlovitch1




Nombre de messages : 808
Localisation : Pays Catalan
Date d'inscription : 20/05/2018

wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Empty
MessageSujet: Re: [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5)   wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeMar 14 Avr 2020 - 20:16

Good evening Frits, while we are talking about Jörg Möller, you precised that he was a great crankshaft designer. I am a curious guy, and if you could share one of Jörg's inputs on this specific topic it would be great.
Revenir en haut Aller en bas
peter1962




Nombre de messages : 17
Localisation : Belgium
Date d'inscription : 29/10/2012

wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Empty
MessageSujet: Re: [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5)   wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeMar 14 Avr 2020 - 21:18

Frits Overmars a écrit:
peter1962 a écrit:
[there I was thinking that Jorg Möller was the second best two stroke genius of that era   (after Jan of course)   but after 50 years we hear that he found the 2Stroke gospel by looking at yamaha.
When Yamaha first dominated two-stroke racing, Jörg was still a student. And shortly after he joined Van Veen, he had the opportunity to study the Yamaha technique. He would have been crazy not to take that opportunity.
Jan Thiel (Jamathi), Jörg Möller (Van Veen Kreidler) and Francisco Tombas (Derbi) were the protagonists in the 50cc field in the early 1970s, and all three had great respect for each other. And so have I.

Christal clear, and not meant to demean anything.
Revenir en haut Aller en bas
Frits Overmars

Frits Overmars


Nombre de messages : 2485
Age : 73
Localisation : Raalte, Holland
Date d'inscription : 12/10/2010

wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Empty
MessageSujet: Re: [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5)   wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeMer 15 Avr 2020 - 1:05

carlovitch1 a écrit:
Good evening Frits, while we are talking about Jörg Möller, you precised that he was a great crankshaft designer. I am a curious guy, and if you could share one of Jörg's inputs on this specific topic it would be great.
I can't tell you much about it Carlo. I happen to know that Jötg had special bearings made, first at Hoeckle in Germany, and later also in Italy.
Maybe Jan Thiel can shed some more light on this.
Revenir en haut Aller en bas
Jan Thiel




Nombre de messages : 512
Age : 81
Localisation : Bangkok
Date d'inscription : 12/10/2010

wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Empty
MessageSujet: Re: [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5)   wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeMer 15 Avr 2020 - 4:27

The trick was to change the bearing balls for smaller ones to make them into C5 or C6.
We got those balls from Hoeckle, who also designed and made the crankshafts.....
I learned a lot about crankshaft design from them!
As did Jorg Moller...
Revenir en haut Aller en bas
carlovitch1




Nombre de messages : 808
Localisation : Pays Catalan
Date d'inscription : 20/05/2018

wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Empty
MessageSujet: Re: [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5)   wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeMer 15 Avr 2020 - 7:49

Good morning Frits and Jan, that's interesting stuff to know.
If I understand correct, using smaller bearings and with more free play (on "normal" bikes you get C3, more rarely C4) was to reduce friction ?
I suppose this would mean a more frequent replacement (which for top level racing engine is no big deal)?
Revenir en haut Aller en bas
Jan Thiel




Nombre de messages : 512
Age : 81
Localisation : Bangkok
Date d'inscription : 12/10/2010

wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Empty
MessageSujet: Re: [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5)   wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeMer 15 Avr 2020 - 9:40

We used the same bearings all season..... Normal bearings with more free play.
Then there were about 11 GP-s a year.
Revenir en haut Aller en bas
carlovitch1




Nombre de messages : 808
Localisation : Pays Catalan
Date d'inscription : 20/05/2018

wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Empty
MessageSujet: Re: [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5)   wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeMer 15 Avr 2020 - 11:06

Thanks Jan, this is indeed a significant lifetime for main bearings on a racing engine.
I would have bet they were wearing out quicker due to high solicitation, shall I understand that the fact that with a very well balanced crankshaft the vibes were so reduced that they were not damaging the bearings?
Revenir en haut Aller en bas
Jan Thiel




Nombre de messages : 512
Age : 81
Localisation : Bangkok
Date d'inscription : 12/10/2010

wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Empty
MessageSujet: Re: [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5)   wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeMer 15 Avr 2020 - 12:09

The balancing was done by Hoeckle.
The vibrations were typical of a parallel twin.
Once C3 bearings were tried, failed after 3 minutes....
We used C5, never had a bearing failure!
Revenir en haut Aller en bas
carlovitch1




Nombre de messages : 808
Localisation : Pays Catalan
Date d'inscription : 20/05/2018

wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Empty
MessageSujet: Re: [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5)   wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeMer 15 Avr 2020 - 13:27

Good to know that only this change on main bearing free play can give such a result difference!
Thanks for the trick, Jan.
Revenir en haut Aller en bas
fpayart

fpayart


Nombre de messages : 1211
Age : 72
Localisation : LYON
Date d'inscription : 11/01/2010

wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Empty
MessageSujet: Re: [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5)   wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeMer 15 Avr 2020 - 14:21

Hello Jan,
Jan Thiel a écrit:
The balancing was done by Hoeckle.
The vibrations were typical of a parallel twin.
Once C3 bearings were tried, failed after 3 minutes....
We used C5, never had a bearing failure!

Sorry, I have a little trouble following the conversation
From what engine are you talking about?

Thank you.
Francis.
Revenir en haut Aller en bas
http://www.fperacing.com/
fpayart

fpayart


Nombre de messages : 1211
Age : 72
Localisation : LYON
Date d'inscription : 11/01/2010

wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Empty
MessageSujet: Re: [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5)   wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeMer 15 Avr 2020 - 14:57

@ Carlovitch1,

The functional clearance of the bearings, mounted in the engine, results from its own tolerance class and from the tolerances on the diameter of the bores in the cases and on the crankshaft axis.
And this at operating temperature.

Francis.
Revenir en haut Aller en bas
http://www.fperacing.com/
carlovitch1




Nombre de messages : 808
Localisation : Pays Catalan
Date d'inscription : 20/05/2018

wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Empty
MessageSujet: Re: [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5)   wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeMer 15 Avr 2020 - 16:26

This makes sense, Francis, and if I understand correct, with a more powerful engine, you generate more heat then need more play.
Revenir en haut Aller en bas
fpayart

fpayart


Nombre de messages : 1211
Age : 72
Localisation : LYON
Date d'inscription : 11/01/2010

wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Empty
MessageSujet: Re: [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5)   wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeMer 15 Avr 2020 - 16:41

No clearance should be determined for a given engine and for a given temperature.
Knowing that the ideal temperature is close to 50 °.
More heat means larger cases bores. And therefore, more final clearance.
Revenir en haut Aller en bas
http://www.fperacing.com/
porttiming124




Nombre de messages : 10
Localisation : canada
Date d'inscription : 15/07/2017

wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Empty
MessageSujet: Re: [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5)   wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeDim 19 Avr 2020 - 2:51

Bonjour a Tous !
j'aurais une question pour Frits !
Sur la photo (du liens en bas) c'est le haut d'un port d'exaust de moteur de motoneige !
Dans le centre on voit qu'il y a une partie plus propre comparativement au coté ou il y a un peu de carbonne !
le centre du port est toujour plus haut alors j'imagine que c'est pour cette raison que c'est lavé comparativement au extrémité ?
Est ce qu'il y a quelque chose a lire ou a apprendre de cette photo pour amélioré la performance ?
je me disais que je pourrait peut etre monté legerement le port dans les extrémiter pour que ca s'ecoule plus uniformément !
merci

[Vous devez être inscrit et connecté pour voir ce lien]
Revenir en haut Aller en bas
Frits Overmars

Frits Overmars


Nombre de messages : 2485
Age : 73
Localisation : Raalte, Holland
Date d'inscription : 12/10/2010

wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Empty
MessageSujet: Re: [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5)   wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeDim 19 Avr 2020 - 3:52

porttiming124 a écrit:
j'aurais une question pour Frits ! Sur la photo (du liens en bas) c'est le haut d'un port d'exaust de moteur de motoneige ! Dans le centre on voit qu'il y a une partie plus propre comparativement au coté ou il y a un peu de carbonne !
le centre du port est toujour plus haut alors j'imagine que c'est pour cette raison que c'est lavé comparativement au extrémité ?
Est ce qu'il y a quelque chose a lire de cette photo pour amélioré la performance ?
je me disais que je pourrait peut etre monté legerement le port dans les extrémiter pour que ca s'ecoule plus uniformément !
merci
There can be a several causes for the carbon pattern in your picture: a flow concentration that blows certain spots clean, hot spots that locally char the oil, and very hot spots that burn themselves clean.
Your assumption that the center of the port ceiling is clean because of the local flow concentration, is probably correct.
And you are also right in assuming that raising the port edges would improve the blowdown flow.  
But the port is elliptical instead of rectangular for a reason: this shape is necessary to keep the piston rings alive.
[Vous devez être inscrit et connecté pour voir cette image]
Revenir en haut Aller en bas
porttiming124




Nombre de messages : 10
Localisation : canada
Date d'inscription : 15/07/2017

wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Empty
MessageSujet: Re: [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5)   wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeDim 19 Avr 2020 - 4:00

Je vais vérifier la forme de mon exaust comparativement à vos recommandations !
merci Beaucoup frits !
Toujours apprécié !
Revenir en haut Aller en bas
CARBONX2




Nombre de messages : 6
Localisation : South Africa
Date d'inscription : 17/04/2020

wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Empty
MessageSujet: Re: [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5)   wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeMar 28 Avr 2020 - 8:21

I have just finished reading this whole topic, best week of knowledge gaining in my life.
Thank you Jan and Frits for sharing your knowledge
Janbros, your spreadsheets are really good.

I have modified 2T engines on-and-off for 30yrs, starting with a Honda MT50. For the last 20yrs I have messed with twin cylinder jetskis. I have been used to dealing with the flat-sided transfer tunnels, knowing they weren't optimal for hp but everyone had the same problem.

I am hoping someone will advise me on this:
On aftermarket cylinders for a special class of competition there are two cylinders siamesed into one casting (595cc x 2), firing at 180. On a cylinder I have now, the transfer ducts on the two outer sides of the cylinder are curved, whereas on the side of the dividing wall between the ducts are mostly flat and narrower, especially the duct for the B, due to limited space between bores. It is an 8 port(2 Boosters) setup with axial angles of A=5 B=10 C=10 D=55
I did a crude transfer flow test, blowing air through from the intake manifold with the cylinder head off, and used a thin rod with some cotton attached to get an idea on flow symmetry.
The A ports short-circuit out the exhaust port, I imagine this will be worse with head on and exhaust pulses pulling the transfer flow.
The general scavenging flow is towards the sides of the cylinders sharing the dividing wall, this is obviously from the flat duct walls causing the flow to enter cylinder at a higher angle. I used wax to change the roof angles of the all the outer ports and the inside D ports to flow more vertically and the flow became more symmetrical.
To make the best of the cylinder, do I re-profile the ports so the flow is as symmetrical as possible or is there a trade-off point between symmetry and mass flow?

Revenir en haut Aller en bas
Frits Overmars

Frits Overmars


Nombre de messages : 2485
Age : 73
Localisation : Raalte, Holland
Date d'inscription : 12/10/2010

wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Empty
MessageSujet: Re: [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5)   wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeMar 28 Avr 2020 - 10:39

Welcome to this forum and thanks for the flowers, Carbonx2.
Mass flow of fresh mixture is useless if the mass short-circuits into the exhaust port. On the other hand, symmetry is desirable, but it should not be at the expense of mass flow.
Then again, lack of symmetry can lead to swirl, mixing fresh mixture with spent gases instead of expelling them.
In short, I don't have a ready-made answer to your problem. Maybe Jan can shine his light on it.
Revenir en haut Aller en bas
CARBONX2




Nombre de messages : 6
Localisation : South Africa
Date d'inscription : 17/04/2020

wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Empty
MessageSujet: Re: [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5)   wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeMar 28 Avr 2020 - 16:38

Thank you Frits for the quick response.
I am happy my thinking falls in line with yours. The answer might have to come from testing changes in stages, I am at least sure that the A-ports need increased axial angle to help stop the short-circuiting.
Revenir en haut Aller en bas
Frits Overmars

Frits Overmars


Nombre de messages : 2485
Age : 73
Localisation : Raalte, Holland
Date d'inscription : 12/10/2010

wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Empty
MessageSujet: Re: [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5)   wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeMar 28 Avr 2020 - 17:53

CARBONX2 a écrit:
Thank you Frits for the quick response.
I am happy my thinking falls in line with yours. The answer might have to come from testing changes in stages, I am at least sure that the A-ports need increased axial angle to help stop the short-circuiting.
Yes, most likely. And maybe you can also aim their radial direction angles further away from the exhaust port.
[Vous devez être inscrit et connecté pour voir cette image]

Revenir en haut Aller en bas
CARBONX2




Nombre de messages : 6
Localisation : South Africa
Date d'inscription : 17/04/2020

wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Empty
MessageSujet: Re: [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5)   wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeMer 29 Avr 2020 - 17:20

Frits.
I am going to map the radial angles accurately, a simple look shows the A-ports are aimed on the intake side of the centre of the piston but not as much as your layout. There are also recesses/pockets behind the A and C ports, I will fill those to make continuous reducing ducts.
On checking my written down numbers on axial angles vs what I thought they were, I found what I stated earlier was a bit off, it should be A=5 B=15 C=10 D=55. I think the A ports short-circuiting from the flow ricocheting off the B port flow. If I up the A port axial angle to 25, there should be significant improvement(Your calculations for a 5-port A port produce an angle of 27,5)

This article by Kevin Cameron may hint at the answer to my question:
[Vous devez être inscrit et connecté pour voir ce lien]
Which leads me to think I should concentrate on symmetry by checking/correcting the ports in the following order C, B, A
Revenir en haut Aller en bas
CARBONX2




Nombre de messages : 6
Localisation : South Africa
Date d'inscription : 17/04/2020

wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Empty
MessageSujet: Re: [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5)   wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeMer 29 Avr 2020 - 18:53

Things are aimed more at the inlet side than expected
Port mapping - radial angles
A Port
Leading = 37
Trailing = 50

B Port
Leading = 55
Trailing = 85

C Port
Leading = 90
Trailing = 118

D Port
Leading = 175
Trailing 179

[Vous devez être inscrit et connecté pour voir cette image]
Revenir en haut Aller en bas
Frits Overmars

Frits Overmars


Nombre de messages : 2485
Age : 73
Localisation : Raalte, Holland
Date d'inscription : 12/10/2010

wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Empty
MessageSujet: Re: [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5)   wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeMer 29 Avr 2020 - 20:28

CARBONX2 a écrit:
A=5 B=15 C=10 D=55. I think the A ports short-circuiting from the flow ricocheting off the B port flow. If I up the A port axial angle to 25, there should be significant improvement(Your calculations for a 5-port A port produce an angle of 27,5)
Those radial angles don't look bad at all. But your calculated axial A-port angle of 27,5° surprises me. It would mean that your 595 cc cylinders have an 87,5 mm bore and a 99 mm stroke. It's possible but I don't think it's likely.
You did not accidentally swap the bore and stroke values, did you? Then your engine would have a 95 mm bore and an 84 mm stroke,
and the axial A-port angle should become 22,1°
Revenir en haut Aller en bas
CARBONX2




Nombre de messages : 6
Localisation : South Africa
Date d'inscription : 17/04/2020

wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Empty
MessageSujet: Re: [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5)   wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitimeMer 29 Avr 2020 - 20:49

I must have calculated wrong, it is:
95mm bore
84mm stroke
Thanks for the correction
Revenir en haut Aller en bas
Contenu sponsorisé





wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Empty
MessageSujet: Re: [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5)   wanted - [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5) Icon_minitime

Revenir en haut Aller en bas
 
[GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5)
Revenir en haut 
Page 1 sur 12Aller à la page : 1, 2, 3 ... 10, 11, 12  Suivant
 Sujets similaires
-
» [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 5)
» [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 4)
» [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 4)
» [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 3) (Locked)
» [GP125] All that you wanted to know on Aprilia RSA 125, and more, by Mr Jan Thiel and Mr Frits Overmars (PART 2) (Locked)

Permission de ce forum:Vous ne pouvez pas répondre aux sujets dans ce forum
 :: ACTUALITES :: [GP] :: [GP125 (et 250 Snif!)]-
Sauter vers: